total length: 54″
length between siyahs: 38 1/2″
length strung: 48 1/2″
draw weight: 25-85#
max. draw length: 34″
brace height: 7 3/4″
The Grózer bows have the best quality of our products. The horn decorated ,hand painted TRH Turkish is a high-range in price from our Grózer series. The design comes from the 10th century and based on archeological grave-findings. They have a very special design (see pictures), and when the string is not on the bow they form a real “C”, which will be bent in the other direction, and this provides quite dynamic attributes for theese bows
This bow is made with a special lamination technique /TRH/, from special components. (They are neither glass or carbon fibers, nor polyester or epoxyte.)The outer layer is a tendon-like material, and the inner layer is a horn-like synthetic material. On account of these materials, the bow is easy (soft), and fast (incredibly fast) at the same time. It has a long draw-length (34″), and an excellent ability to absorb vibrations.
Grozer Csaba Bowyer master:
The TRH technology refers to those special materials that are used for making the bow (it is built of 6 different layers). With these materials we can obtain similar features like the ones of composite bows. The bows made with TRH Lamination are smooth during drawing and fast during shooting. Moreover, since they have quite little handshock, they are accurate. They are more stable than bows made with simple lamination techniques.
‘C’- shape or bent forward arms
Briefly speaking I can say that with relatively soft materials like horn and sinew, the C-shape works better, but with stiffer materials such as the fiberglass, carbon, the bent forward arms are much better in case of a traditional recurve bow. There were bent forward arms bows among the old horn bows as well, where the handle angle was quite big, for example in the Avar, Hunnish types.
When stringing the bow, the lower end of it mustn’t touch the ground and the upper end must be held and pressed under the bezel. The middle of the hilt should lean up on the inside part of the thigh, while the lower end of the bow above the bezel should lean up on the outside of your lower leg.
Before using set the string in the middle of the siyahs.
In the course of using the bow keep that part upwards where you can see the name Grózer.
The C-shaped and composite bows should be strung crouching, the bow pressed to the knees.
If the C-shaped bows are strung improperly its assymetry can be too much, so it should be twisted to the other direction to get the appropriate assymetry of the limbs. (especially with the TRH and composite bows)