Biocomposite Laminated Scythian recurve bow G/413

$699.00

Draw weight range : 25-65LBS

SKU: G/413 Categories: ,

Description

recurve

 

total length: 53”
length between siyahs: 43 3”
length strung: 45 1”
max. draw length: 32
brace height: 5 3”

New technology.
Actually it combines the laminated, the TRH laminated, the TRH Extra II laminated bows.
And to some extent the extra III bows as well. The bows made by this technology consist of the following materials: the middle layers of wood, the inner layer of pressed horn, while the outer layer of pressed sinew plate. These two layers are glued to the wooden plate by modern glue and the glued layer gets a fibre strengthening.
Due to these biocomposite materials and the modern technology these bows are faster then the simple laminated bows. They are appreciably soft and without any resonance when drawing.
These bows give almost the same shooting experience than a hornbow and even their appearance is similar, although the biocomposite bows are flatter.

 

Small bow, with a characteristic handle, without rigid tips. Sized accirding to oroginal sizes.
The outer layer is a pressed sinew plate, the inner layer is pressed horn, the middle layer is wood. The inner layer is colourful.
It is surprisingly fast, without any shock. It is very similar to a composite bow, it is only flatter. It is a plesasure to shoot with, due to the used materials.

Grozer Csaba Bowyer master:

Users instructions

When stringing the bow, the lower end of it mustn’t touch the ground and the upper end must be held and pressed under the bezel. The middle of the hilt should lean up on the inside part of the thigh, while the lower end of the bow above the bezel should lean up on the outside of your lower leg.
Before using set the string in the middle of the siyahs.
In the course of using the bow keep that part upwards where you can see the name Grózer.

 

 

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.