The Traditional Biocomposite Mongolian recurve bow made by Csaba Grozer world-famous bowyer master
|Maximum draw length||32″|
Big bow with groove guide. It has got the shape of C when it is unstrung.
The outer layer is an amber coloured pressed sinew plate. The middle is wood. The inner layer is pressed hoen which is colourful.
It can be drawn smootly. Accurate.
Actually it combines the laminated, the TRH laminated, the TRH Extra II laminated bows.
And to some extent the extra III bows as well. The bows made by this technology consist of the following materials: the middle layers of wood, the inner layer of pressed horn, while the outer layer of pressed sinew plate. These two layers are glued to the wooden plate by modern glue and the glued layer gets a fibre strengthening.
Due to these biocomposite materials and the modern technology these bows are faster then the simple laminated bows. They are appreciably soft and without any resonance when drawing.
These bows give almost the same shooting experience than a hornbow and even their appearance is similar, although the biocomposite bows are flatter.
Csaba Grozer Users instructions
When stringing the bow, the lower end of it mustn’t touch the ground and the upper end must be held and pressed under the bezel. The middle of the hilt should lean up on the inside part of the thigh, while the lower end of the bow above the bezel should lean up on the outside of your lower leg.
Before using set the string in the middle of the siyahs. If the siyahs twisted during the stringing of the bow, they have to be set to the middle as well by twisting it to the opposite direction.